Steps To Rooting Galaxy S6/S6 Edge Active

Before you begin make sure to install all the correct files (the video will show them to you).

Once downloaded to your computer or cell proceed to install, the system will ask permission and give to accept the installation, we also will install SuperSU (If you have already installed SuperSU you have to uninstall the current version in order to install the pingpongroot)

Once you start the pingpongroot application, click the Download Data button and then click Get root!. And you should be ready to make root in seconds. If you get an error message, SuperSU only closes the pingong, open the app SuperSU and then reopen it thus giving PingPong superuser access. Now click and get root!

Ready, now you have to check root and simply restart the phone to apply changes and verify that no errors occur. Once you started the cell you can download and use RootChecker to verify that you have root access on your cell

Root S6 by pingpongroot will not touch the bootloader and recovery so that we will not raise the famous Knox which gives us assurance that we will not lose the guarantee cell should require it. But note that if you install a recoveryMod as ClockWorkMod or TWRP this will raise the Knox and make you you’re your warranty.

If you come from another Galaxy S you had changed and you want to make big changes to your S6 I remind you that at the moment still cannot install Xposed, Freedom, LuckyPatcher or TbackUp and make them work 100% because they are not fully compatible with Android Lollipop and ART. You will only get headaches trying to configure them with unsolvable problems.

Still if you get to make the mistake of installing and stay in a boot loop you can check the tutorial on how to reset a Galaxy S6 factory without increasing the Knox counter.

Attention: Problems When Rooting A Galaxy S6

99% of the time, you can root Samsung Galaxy S6 without complications or problems, however, this can sometimes fail arbitrarily resulting in a softbrick or boot loop. This is that the cell cannot start the Android system. If your galaxy s6 is in a boot loop softbrick or you have two options:

  • Enter recovery mode and do a factory reset wipe cache wipe data +
  • A clean Samsung firmware flashing with Odin.

Can You Install Android 4.2 On Samsung Galaxy S6? (Root Required)

It is often seen that Samsung releases latest Android updates for its tablets very quickly. But, the original Transformer coming with its tablets has been there for quite some time now. Probably, that is the reason Samsung is looking to roll out Android 4.2 update, but later than it would come for other tablets. However, with the help of this guide, you can update your Samsung Galaxy S6 with Android 4.2.

The following features will come with the Android 4.2 update:

– Swype-like typing keyboard

– Better actionable notifications

– Option to toggle settings quickly through the status bar

– Multi-usage support

– Camera with photo Sphere to click 360 degrees panorama pictures

– Improved overall performance

– Stability improvements

Note: Before starting make sure that you root your Galaxy S6 first. If you have never rooted a S6 before, watch this video:

How to Install Android 4.2 on Samsung Galaxy S6:

  1. See that your device has ClockworkMod recovery installed.
  2. The latest version of the ROM and the addon package should be downloaded in the device.
  3. Move the two downloaded zip files to the SD card inserted in the tablet without extracting them.
  4. Switch off the tablet and restart it in the ClockworkMod recovery mode. This can be done by pressing Volume Down key and power buttons, both simultaneously.
  5. When the words start to scroll on the top left side of the tablet, you are required to press the Volume Up key within 5 seconds. This will take the device to the recovery mode.
  6. You now need to backup your existing ROM. This can be done by selecting Backup and Restore option and then choosing Backup again. When this is done, return to the backup recovery mode of the device.
  7. Choose Data/Factory reset option and click on Yes on the following screen.
  8. You now need to choose ‘install zip from sdcard‘ option. Follow this by choosing ‘zip from sdcard‘. Look for the ROM file and install it.
  9. When the ROM installation is done, select ‘choose zip from sdcard again‘ option. Install the addon package from there.
  10. Now, click on Back and choose ‘reboot system now‘ to reboot your device to Android 4.2.

Things to Make Sure While Installing the Update:

– Kindly make sure that you are porting this update with Samsung Galaxy S6 with model number S6 only, as this update will not work in any other tablet.

– Ensure that you follow this guide step-by-step and not miss any, or else it may cause damage to your device.

– It is important to backup the tablet’s data before installing this update, as this process will wipe all the data. You may backup SMS, contacts, media files and bookmarks. Do not worry about the data in the SD card as that will remain intact.

– Note down the apn settings before starting with this process. This is necessary for mobile data net to work afterwards. To backup these settings, go to Settings, click on More, choose Mobile Networks and open the Apn in use and you can note down the settings from there.

The Galaxy S6 Root: Unleash The True Potential Of Your S6!

Do you have plans to get your Android based Galaxy S6 rooted? If you have then you are on the right page. Rooting Samsung Galaxy S6 has been the most talked-about modification among people who want to make the best use out of their devices. It does not only render the phone entertaining but also extremely useful.

Although there are risks involved in doing the modification your device can be protected with these threats if you use the right method.

The Process Of Rooting a Samsung Galaxy S6

This process of learning how to root your Samsung Galaxy S6 is easy, and it will not require you to physically connect your device to your computer but will necessitate installing SDK setup. SDK or Software Development Kit is a tool that you can use to manually modify your device without connecting your phone using a cable to your computer. The steps are as follows:

  1. Go to the command prompt and type adb devices to check if your phone is detected.
  2. Get your phone and copy the following files:
  • $ adb push rageagainstthecage /data/local/tmp/ rageagainstthecage
  • $ adb push push Superuser.apk /data/local/tmp/Superuser.apk
  • $ adb push busybox /data/local/tmp/busybox
  • $ adb push su /data/local/tmp/su
  1. In order to alter the file permissions type the following commands:
  • $ adb shell
  • $ chmod 700 /data/local/tmp/ rageagainstthecage
  • $ chmod 755 /data/local/tmp/busybox
  1. After changing the file permission run the following commands:
  • cd /data/local/tmp
  • ./rageagainstthecage
  1. You will notice that the adb shell will close, reopen it by typing the commands:
  • adb kill-server
  • adb start-server
  • adb shell
  1. At this point the adb shell should transform from $ to # and this signifies that your device is already modified.
  2. If it doesn’t happen just repeat the entire process.
  3. You may then type mount –o remount,rw –t yaffs2 /dev/block/mtdblock3 /system to mount your system.
  4. Type the following commands to install busybox:
  • cd /data/local/tmp
  • ./busybox cp busybox /system/bin
  • chmod 4755 /system/bin/busybox
  1. Copy and install the rest of the files by using busybox through these commands:
  • busybox cp Superuser.apk /system/app
  • busybox cps u /system/bin
  • chmod 4755 /system/bin/su
  1. Set your files to read only by typing these commands
  • Mount –o remount,ro –t yaffs2 /dev/block/mtdblock3 /system
  1. Check if the process worked by reopening the adb shell, typing su and checking on your phone screen.

Top Reasons Why Rooting Galaxy S6 Is Very Popular Right Now

Among the best things about getting root access on Galaxy S6 is that you will be able to install applications such as Titanium backup. With this feature, you can back up or restore your phone’s data and you can even freeze non-system and system applications. You will also be able to customize your graphics and use ROM manager which will allow you to update your device’s clockworkMod recovery. Another thing is that you can also add the performance and battery life of your device. And if your phone is outdated you can update it to the latest version. The list of applications that you can install and take advantage of are as follows:

  • Titanium Backup
  • Rom Manager
  • Market Enabler
  • Shootme
  • CPU Master
  • File Expert
  • FTP Droid
  • Quickboot
  • Juice Defnder
  • Bird Bar
  • Chainfire
  • Battery Calibration
  • System Cleaning Tool
  • ScreenCast Video Recorder – Free
  • AdbWireless

How You Can Protect Your Device From Viruses When You Root S6?

Modifying your phone necessarily means losing the security restrictions on your device. The absence of these restrictions will enable you to install applications including viruses, Trojans and spyware. When any of these malicious software programs infect your device it will jeopardize your mobile security. In order to avoid these terrifying consequences you may need to install an antivirus software program to protect your device from the dangers of having these viruses. There is plenty of malicious software programs scattered in the internet and you need to take the necessary precautions in protecting your device and your personal information.

Doing it manually will require you to follow the exact instructions and to get the guide from the most reliable source. If you are having difficulties modifying your device typing the commands mentioned above you can take advantage of a software program that specializes in Rooting Samsung Galaxy S6.

The best thing about using a software program is that you are guaranteed with a safe and fast process that doing the Galaxy S6 root will neither jeopardize your schedule nor your device. Most of the best utilities even offer lifetime access and money-back guarantee to ensure that you will lose nothing in case you are dissatisfied with the service.

How To Root Samsung Galaxy S6 running Lollipop

Wondering how you can Root Samsung Galaxy S6 on Android lollipop? There are actually different methods to do the modification and these various processes usually provide different outcomes depending on how you perform the steps to root and what guide you follow.

One thing that you can be sure of when you do the rooting of your Galaxy S6 is that you will never miss out everything that your device is capable of.

How To Root Android lollipop (5.0+) on Galaxy S6

  1. You may start by installing a backup software program to make a copy of the files and applications on your phone.
  2. Continue by turning off your device and hold the trackball down while you press the power button to boot it.
  3. Connect your device to your PC using a USB cable and make sure that your phone is detected.
  4. You will know if the bootloader is unlocked when you see a small open lock icon at the bottom part of the screen.
  5. Boot into the recovery image by going to the fastboot menu.
  6. Disconnect and reconnect your device and run the command below:

platform-tools/fastboot flash recovery /path/to/recovery-RA-passion-v2.2.1.img.

  1. Go to the fastboot menu and then click on the Bootloader option.
  2. When you are at the bootloader menu just simply select the Recovery option.
  3. The Bootloader unlock have already deleted your data so what you can do is make a backup by simply choosing the “Nandroid backup/restore” option.
  4. Activate your device as a USB filesystem by going back to the main menu and turning on “USB-MS”.
  5. Get your Nandroid backup out of your SD card and replace it with your superuser utility.
  6. Disconnect your Samsung Galaxy S6 from the computer and turn the USB-MS off on your device.
  7. Go to the main recovery menu and select “Flash zip from sdcard” and then the superuser utility. At this point you will receive some messages that your device is being modified.
  8. Go to the main menu and reboot. Close the shell and run the su command to see if your phne has already been modified.

When you Root Galaxy S6 running lollipop you will be guaranteed with the most ideal process of modifying the device. In just a short period of time you will enjoy the benefits of having a modified phone.

How To Root Samsung Galaxy S6 And Then Tweak It!

In a few easy steps, you will learn how to root Samsung Galaxy S6. But before you begin, you need to back up your important data from your phone.

  1. Download the hack kit that will perform the process.

You must download the kit to your Windows-based PC. It could be XP, Vista or 7. And you must have admin rights.

  1. Extract the kit to your desktop.
  2. Run the file that has .exe extension.

This file is found inside the folder of the kit you have extracted at step 2.

  1. Turn on your phone and enable USB debugging.

To do this, you must go to Settings. Then, access Applications and check USB Debugging.

  1. Change the mode of your device into Charge Only mode.

You can change it by going to Settings. Then, go to Connect to PC. Choose the default mode, i.e. Charge Only.

  1. Connect your phone to your desktop.
  2. Run the file that has a .cmd extension.
  3. Let the toolkit complete the process.

While completing the process, your phone will reboot several times. You must not do anything but to leave it be. You must only touch it when you get the confirmation that the Galaxy S6 root process has been completed.

How to Root Samsung Galaxy S6 and Install DN3 (Ditto)


  1. Before starting with the process of installation of the Ditto note 3 please check that your phone has a minimum of 60% battery in it. Low battery might create problems.
  2. The USB debugging must be enabled. The android users can do it by going to the settings options and clicking USB debugging to enable the USB debugging.
  3. Backing up of data is of immense importance so that it’s ensured that the data is safe and can be restored back again once the installation update has been made successfully:
  • SMS BACKUP – Open > Backup > Default/Internal storage or any destination you want to copy > Save.
  • CALL LOGS BACKUP & RESTORE – Make a back up for call logs by downloading and installing Call Logs Backup & Restore from the Google Playstore. Go to Backup > Copy to SD Card > Enter name > OK.
  • Backup Contacts > Options > Import/Export > Export to SD card > Confirm > OK
  • Similarly copy the Images, Songs, Videos and remaining files to External SD card
  • Synchronize the contacts using the Gmail application
  • Restore the Call Log by the Call Logs Backup & Restore, step#2.
  • Go to the Application Menu and go to Settings and Access point names for APN and MMS settings.

Before starting with the Installation of ditto note 3, rooting of S6 is mandatory. Follow the below mentioned procedure.


You must download the following files before starting rooting:

  • DN3_v3.1 (GOHAN EDITION).zip (size: 1.44 GB)
  • CF-AUTOROOT  (size: 13.3 MB)
  • ODIN 3.09 (size: 1 MB)


Start with the Rooting of Samsung Galaxy S6:

  • Extract the zip “CF- AUTOROOT” to find the file .tar.md5
  • Search and run odin3 v3.09 as Administrator
    • Switch of the phone and hold together down Home + Power + Volume Down key together for 5 seconds.
    • Tap the PDA option from ODIN and select .tar.md5 file that has already been downloaded. Connect S6 through USB data cable to the Computer.
    • Click start.
    • The rooting is a success if you the pass sign on the table – ID:COM.

    Your S6 has been rooted successfully.


    • Hold the Home + Power + Volume Up key together at once in order to back up the current ROM, EFS and Modem to boot into the TPRW recovery/CWM recovery and then Select the Wipe option >  Go to advanced > Wipe Cache and Dalvik Cache.
    • The next is very simple, just download the Ditto S6 3.1 V3 ROM and store it in the SD card memory.
    • Make a back up the Of the installed ROM by the below steps:
      If you are using CWM – Backup and restore > Confirm
      If you are using TWRP- Backup > System files to be saved > Confirm OK.
    • Do the factory Reset
      If you are using CWM – Wipe data/Factory Reset > Confirm
      If you are using TWRP- Wipe data/factory Reset > Confirm
    • Install the DN3 (Ditto S6 3) on S6 7100
      If you are using CWM- SD card option > Install Zip > Look for the DN3 custom OS and Confirm > OK installation.
      If you are using TWRP – Select Install > Look for the DN3 custom OS > After loading it into the TWRP, Confirm > OK.
    • The ROM takes time in getting flashed so wait up. After the completion of the installation of the Ditto S6 V3 ROM, Factory Reset your phone by going to the wipe option again in the CWM/ TWRP recovery menu.
    • The final step is to REBOOT again and set up the newly installed ROM so as to enjoy the brilliant features of Galaxy S6 3.
  • And of course, you can also use other apps other than Ditto!